AirPro's industry-leading Static Forward-Facing Camera Calibration
AirPro Diagnostics is the US-based ADAS diagnostic and calibration partner for shops doing OEM-quality repair work. Static Forward-Facing Camera Calibration is one of the most safety-critical procedures in the ADAS catalog, and every assist is led by one of our US-based Brand Specialists with in-depth experience on the vehicle brand on the lift.
What Static Forward-Facing Camera Calibration is
AirPro services responds in under 10 minutes, most assists in under 90 seconds. Full insurance documentation aligned to OEM position statements and DRP audit requirements.
The forward-facing camera mounted behind a vehicle’s windshield is the primary sensor for lane keep assist, lane departure warning, automatic emergency braking, traffic sign recognition, adaptive cruise control, and pedestrian detection. When a windshield is replaced, when the camera is removed or replaced, when a vehicle is involved in a collision, or when ride height is altered, that camera has to be recalibrated to the OEM operating spec before the vehicle leaves the shop.
A static calibration is performed in the bay against a fixed target setup. The vehicle is positioned per the OEM position statement, the target is set to the precise distance, height, angle, and lighting conditions the OEM specifies, and the camera re-learns its reference points against that target. Some OEMs require static-only calibration. Some require a static target calibration first, followed by a dynamic drive. AirPro’s Brand Specialists know which path each OEM requires and confirm the requirement against the OEM position statement before the calibration begins.
A US-based Brand Specialist is one click away.
Self-Inspection Scans handle the routine work. When a vehicle is unfamiliar, a code is unusual, or a calibration procedure needs an OEM-specific walkthrough, your tech requests a U.S.-based Brand Specialist directly from ORION. The Specialist takes over the AirPro device remotely, walks your tech through the procedure, and generates the documentation when the work is done.
How AirPro delivers it, with Auggie Air in the bay
AirPro is a remote diagnostic services provider. The vehicle stays in your bay. Your technician runs the procedure on the AirPro device in the shop, with Auggie Air rendering the target setup, and a US-based Brand Specialist with in-depth experience on the vehicle brand walks the calibration with them on the call. The diagnostic depth and the documentation come from AirPro. The physical work stays with your technician.
Auggie Air is AirPro’s purpose-built targeting device with augmented reality. It uses machine learning and computer vision to render the ADAS targets and lighting conditions the OEM position statement calls for, in a fraction of the floor space traditional physical target setups demand. Auggie Air renders the target. The calibration runs through a US-based Brand Specialist on the call.
Every Static Forward-Facing Camera Calibration assist is led by one of our US-based Brand Specialists. No script. No call-tree. No transfer to a supervisor. The Brand Specialist on the line is the one with in-depth experience on the brand. They confirm the OEM position statement governing the calibration, verify the target setup Auggie Air renders is correct for that VIN, monitor the calibration as it runs, and verify the result to OEM operating spec when the procedure completes. Documentation generates automatically against the OEM position statement so the file is ready for insurance and audit review the moment the vehicle leaves.
OEM-licensed software is available on request. Our US-based Brand Specialists run diagnostics with brand-authenticated tooling, including security gateway authentication for late-model Stellantis, Mercedes-Benz, BMW, and other vehicles that require it.
Key points
- US-based Brand Specialist on every assist. Every Static Forward-Facing Camera Calibration is led by one of our US-based Brand Specialists with in-depth experience on the vehicle brand. AirPro commits to responding within 10 minutes of every assist request, and a majority of requests are attended to within 90 seconds.
- Auggie Air renders the target in a fraction of the floor space. Auggie Air is AirPro’s targeting device with augmented reality. It renders the static target setup the OEM position statement calls for, including the precise distance, height, angle, and lighting conditions, without the physical target boards and bay footprint traditional static calibrations require.
- OEM position statement is the standard. The Brand Specialist confirms the OEM position statement governing the calibration (target type, target distance, vehicle positioning, lighting, and ride-height conditions) before the calibration begins. Calibration is verified to OEM operating spec with all active fault codes resolved.
- Static-plus-dynamic workflows handled in a single assist. Many OEMs require a static target calibration in the bay followed by a dynamic drive. AirPro’s Brand Specialists run both halves of the procedure as a single coordinated assist, from initial scan through verified calibration.
- 98% vehicle coverage across every powertrain. AirPro services cover 98% of all vehicles on the road, including internal combustion, hybrid, plug-in hybrid, and battery electric, including the proprietary ADAS implementations EV-native OEMs build their vehicles around.
- Full insurance documentation, audit-ready. Documentation generates automatically against the OEM position statement. Files are aligned to DRP audit requirements for State Farm, Allstate, GEICO, Progressive, USAA, and other major DRP programs, so the documentation is ready for insurer pass-through the moment the calibration is verified.
- Trusted partner for every shop tier. Whether you are a single-shop independent running low monthly volume, a high-volume single-shop operator, a small MSO running two to three locations, or a large MSO running dozens to hundreds of locations, you get the same Brand Specialist support and the same documentation standard on every Static Forward-Facing Camera Calibration.
Frequently Asked Questions
What is a Static Forward-Facing Camera Calibration?
A static calibration is performed in the bay against a fixed target setup positioned per the OEM position statement. The forward-facing camera mounted behind the windshield re-learns its reference points against that target so it can support lane keep assist, lane departure warning, automatic emergency braking, traffic sign recognition, adaptive cruise control, and pedestrian detection at OEM operating spec.
When is a Static Forward-Facing Camera Calibration required?
The OEM position statement is the standard. The most common triggers are windshield replacement, camera replacement or removal, collision repair, suspension or ride-height work, and wheel alignment that changes the vehicle’s reference geometry. The Brand Specialist on the assist confirms the exact requirement against the OEM position statement for that VIN before the calibration runs.
**How does Auggie Air fit into a static calibration?** Auggie Air is AirPro’s targeting device with augmented reality. Auggie Air renders the static target setup the OEM position statement calls for, including the precise distance, height, angle, and lighting conditions, in a fraction of the floor space a traditional physical target board requires. Auggie Air renders the target. The calibration runs through a US-based Brand Specialist on the call.
**Is Auggie Air the calibration device?** No. Auggie Air is the targeting device with augmented reality. It renders the target. The calibration runs through the AirPro device in the bay with a US-based Brand Specialist on the call.
Does AirPro come to the shop?
No. AirPro is a remote diagnostic services provider. The vehicle stays in your bay. Your technician runs the procedure on the AirPro device with Auggie Air rendering the target, and a US-based Brand Specialist walks the calibration with them on the call. The diagnostic depth and the documentation come from AirPro. The physical work stays with your technician.
Who is on the call from AirPro?
A US-based Brand Specialist with in-depth experience on the vehicle brand on the lift. No script. No call-tree. No transfer to a supervisor. The Brand Specialist on the line is the one with in-depth experience on the brand.
How quickly will an AirPro Brand Specialist respond when we request the assist?
AirPro commits to responding within 10 minutes of every assist request, and a majority of requests are attended to within 90 seconds.
What if the OEM requires a static calibration first, then a dynamic drive?
Many OEMs do. The Brand Specialist runs both halves of the procedure as a single coordinated assist. The static target calibration is verified in the bay, then the dynamic drive is monitored on the road, with documentation generated against the OEM position statement for both phases.
Do we need a dedicated calibration bay to run static calibrations with AirPro?
Auggie Air renders the static target setup in a fraction of the floor space traditional physical target boards require. Your AirPro Representative confirms the bay conditions and clearances against the OEM position statement during onboarding so you know which vehicles you can run in your current space.
What vehicles does AirPro cover?
AirPro services cover 98% of all vehicles on the road, including internal combustion, hybrid, plug-in hybrid, and battery electric, including the proprietary ADAS implementations EV-native OEMs build their vehicles around.
Does AirPro handle security gateway access on late-model vehicles?
Yes. Our US-based Brand Specialists run diagnostics with brand-authenticated tooling, including security gateway authentication for late-model Stellantis, Mercedes-Benz, BMW, and other vehicles that require it.
Does AirPro run against OEM-licensed software?
OEM-licensed software is available on request. The standard scan path uses brand-authenticated, best-in-class third-party, multi-brand, or aftermarket tooling.
How is the calibration verified?
The Brand Specialist verifies the calibration to OEM operating spec with all active fault codes resolved before the assist closes. The documentation reflects the verified result.
What does the documentation include?
Documentation generates automatically against the OEM position statement and includes the scan record, the calibration result verified to OEM operating spec, the pre-calibration and post-calibration fault code state, and the OEM reference. Files are aligned to DRP audit requirements for State Farm, Allstate, GEICO, Progressive, USAA, and other major DRP programs.
Can the documentation pass an insurance audit?
Yes. Documentation is built to pass DRP audits for State Farm, Allstate, GEICO, Progressive, USAA, and other major DRP programs, and is aligned to the OEM position statement governing the calibration.
Is this service available to single-shop independents, or only to MSOs?
Both. AirPro is a trusted partner for both standard repair work and the vehicles that do not fit a standard repair path, and the Brand Specialist support, the coverage, and the documentation standard are the same whether you run a single shop at low monthly volume or a large MSO across dozens to hundreds of locations. Higher-volume single-shop operators and MSOs additionally receive DRP audit alignment built into the documentation flow.
How do we get started?
Meet with an ADAS Specialist using the form above, or contact an AirPro Representative to partner with AirPro for industry-leading ADAS Diagnostic and Calibration services.
Be the one-stop shop your customers are looking for
Meet with an AirPro rep to find the best solution for your business today. Become the standout amongst your competitors.